EDP Sciences logo
Authentification abonné
Rechercher
Menu

Article cité par

La fonctionnalité Article cité par… liste les citations d'un article. Ces citations proviennent de la base de données des articles de EDP Sciences, ainsi que des bases de données d'autres éditeurs participant au programme CrossRef Cited-by Linking Program. Vous pouvez définir une alerte courriel pour être prévenu de la parution d'un nouvel article citant " cet article (voir sur la page du résumé de l'article le menu à droite).

Article cité :

Processing-dependent chemical ordering in Cu3Au characterized via non-destructive Bragg coherent diffraction imaging

Nathaniel Warren, Chloe Skidmore, Katherine J. Harmon, Wonsuk Cha, Jon-Paul Maria, Stephan O. Hruszkewycz and Darren C. Pagan
Scripta Materialia 267 116820 (2025)
https://doi.org/10.1016/j.scriptamat.2025.116820

Temperature-dependent short-range order formation and its effects on yield strength in single crystals of the equiatomic Cr-Mn-Fe-Co-Ni high-entropy alloy

Yue Yu, Le Li, Zhenghao Chen, Hisanori Tanimoto, Tomoyuki Terai, Masato Yoshiya and Haruyuki Inui
Journal of Alloys and Compounds 1014 178559 (2025)
https://doi.org/10.1016/j.jallcom.2025.178559

Inverse design of short-range order arrangement via neural network

Daegun You, Orcun Koray Celebi, Diab W. Abueidda, Gorkem Gengor, Ahmed Sameer Khan Mohammed, Seid Koric and Huseyin Sehitoglu
International Journal of Solids and Structures 309 113175 (2025)
https://doi.org/10.1016/j.ijsolstr.2024.113175

High-Temperature Twinning in Single Crystals of the Cr20Fe20Mn20Co35Ni5 High Entropy Alloy

I. V. Kireeva, Yu. I. Chumlyakov, A. A. Saraeva, A. V. Vyrodova, Z. V. Pobedennaya and I. V. Kuksgausen
Physical Mesomechanics 28 (3) 301 (2025)
https://doi.org/10.1134/S1029959924601532

Achieving ultra-strong and ductile CoNi-based FCC multi-principal element alloys via alloying with refractory Mo and W

Tao Huang, Kaiju Lu, Fengchun Jiang, Xiao Zhou, Qing Zhou, Zhibin Zhang, Yongxiong Chen, Zhenfeng Hu and Xiubing Liang
Scripta Materialia 247 116111 (2024)
https://doi.org/10.1016/j.scriptamat.2024.116111

Short-range ordering mechanics in FCC materials

Daegun You, Orcun Koray Celebi, Gorkem Gengor, Ahmed Sameer Khan Mohammed, Wael Abuzaid and Huseyin Sehitoglu
International Journal of Plasticity 174 103919 (2024)
https://doi.org/10.1016/j.ijplas.2024.103919

Effect of ultrasonic vibration and deep cryogenic treatment on the residual stress, mechanical properties and microstructures of HR-2 austenitic stainless steel

Quanwei Yang, Zhigang Dong, Renke Kang and Zhaocheng Wei
Materials Science and Engineering: A 900 146502 (2024)
https://doi.org/10.1016/j.msea.2024.146502

First-principles and cluster expansion study of the effect of magnetism on short-range order in Fe–Ni–Cr austenitic stainless steels

Tianyu Su, Brian J. Blankenau, Namhoon Kim, Jessica A. Krogstad and Elif Ertekin
Acta Materialia 276 120088 (2024)
https://doi.org/10.1016/j.actamat.2024.120088

Cu–Mg dilute alloys- Assessment of strengthening, internal friction, and electrical conductivity

Taner Ozdal, Burak Nalcaci, Orhan Akyuz, Halil Goker and Ali Arslan Kaya
Materials Chemistry and Physics 319 129327 (2024)
https://doi.org/10.1016/j.matchemphys.2024.129327

Variation of first pop-in loads in nanoindentation to detect chemical short-range ordering in the equiatomic Cr-Co-Ni medium-entropy alloy

Le Li, Jun-Ping Du, Shigenobu Ogata and Haruyuki Inui
Acta Materialia 269 119775 (2024)
https://doi.org/10.1016/j.actamat.2024.119775

Atomic Structures and Mechanical Properties in High-Entropy Alloys —With Special Attention to Short-Range Ordering

Haruyuki INUI, Le LI, Zhenghao CHEN and Kyosuke KISHIDA
Nihon Kessho Gakkaishi 65 (3) 172 (2023)
https://doi.org/10.5940/jcrsj.65.172

Cyclic deformation behavior of an equiatomic CrFeNi multi-principal element alloy

Shubham Sisodia, Maik Rajkowski, Guillaume Laplanche and Ankur Chauhan
International Journal of Fatigue 174 107723 (2023)
https://doi.org/10.1016/j.ijfatigue.2023.107723

Orientation dependence of the effect of short-range ordering on the plastic deformation of a medium entropy alloy

S. Picak, P. Singh, D. Salas, M.A. Tunes, X. Fang, L. Zhou, M.J. Kramer, Y.I. Chumlyakov, Duane D. Johnson, R. Arroyave, Y. Ren and I. Karaman
Materials Science and Engineering: A 888 145309 (2023)
https://doi.org/10.1016/j.msea.2023.145309

Effect of nitrogen content on mechanical properties of 316L(N) austenitic stainless steel

Yong Wang, Zhenhua Wang, Wei Wang and Bingyang Ma
Materials Science and Engineering: A 884 145549 (2023)
https://doi.org/10.1016/j.msea.2023.145549

Barrier-free predictions of short-range ordering/clustering kinetics in binary FCC solid solutions

Anas Abu-Odeh, Blas Pedro Uberuaga and Mark Asta
Acta Materialia 257 119185 (2023)
https://doi.org/10.1016/j.actamat.2023.119185

Physical Factors Controlling Large Shape Memory Effect in FCC ↔ HCP Martensitic Transformation in CrMnFeCoNi High-Entropy-Alloy Single Crystals

Irina V. Kireeva, Yuriy I. Chumlyakov, Anastasia A. Saraeva and Anna V. Vyrodova
Metals 13 (10) 1755 (2023)
https://doi.org/10.3390/met13101755

Giant shape memory effect of the [1¯44]-oriented FCC CrMnFeCoNi high-entropy alloy single crystals with FCC↔HCP martensitic transformation

I.V. Kireeva, Y.I. Chumlyakov, A.A. Saraeva and A.V. Vyrodova
Scripta Materialia 235 115621 (2023)
https://doi.org/10.1016/j.scriptamat.2023.115621

Evolution of short-range order and its effects on the plastic deformation behavior of single crystals of the equiatomic Cr-Co-Ni medium-entropy alloy

Le Li, Zhenghao Chen, Shogo Kuroiwa, Mitsuhiro Ito, Koretaka Yuge, Kyosuke Kishida, Hisanori Tanimoto, Yue Yu, Haruyuki Inui and Easo P. George
Acta Materialia 243 118537 (2023)
https://doi.org/10.1016/j.actamat.2022.118537

Negative stacking fault energy in FCC materials-Its implications

Daegun You, Orcun Koray Celebi, Ahmed Sameer Khan Mohammed and Huseyin Sehitoglu
International Journal of Plasticity 170 103770 (2023)
https://doi.org/10.1016/j.ijplas.2023.103770

Critical resolved shear stress for twinning and twinning-induced plasticity in single crystals of the CoCrFeNiMo0.2 high-entropy alloy

I.V. Kireeva, Yu.I. Chumlyakov, A.V. Vyrodova and A.A. Saraeva
Materials Science and Engineering: A 850 143586 (2022)
https://doi.org/10.1016/j.msea.2022.143586

Theory of history-dependent multi-layer generalized stacking fault energy— A modeling of the micro-substructure evolution kinetics in chemically ordered medium-entropy alloys

Peijun Yu, Jun-Ping Du, Shuhei Shinzato, Fan-Shun Meng and Shigenobu Ogata
Acta Materialia 224 117504 (2022)
https://doi.org/10.1016/j.actamat.2021.117504

Adaptive attenuation of hierarchical composition fluctuations augments the plastic strain of a high entropy steel

Simon Tsianikas, Yujie Chen, Ashley Slattery, Jonathan Peters and Zonghan Xie
Materials Science and Engineering: A 857 144037 (2022)
https://doi.org/10.1016/j.msea.2022.144037

Direct observation of initial stages of precipitation hardening process in commercial Al 6061 alloy

Guy Hillel, Sergey Kalabukhov, Nachum Frage, Eugene Zaretsky and Louisa Meshi
Journal of Materials Science 57 (22) 10395 (2022)
https://doi.org/10.1007/s10853-022-07341-2

Recent Progress in Our Understanding of Phase Stability, Atomic Structures and Mechanical and Functional Properties of High-Entropy Alloys

Haruyuki Inui, Kyosuke Kishida and Zhenghao Chen
MATERIALS TRANSACTIONS 63 (3) 394 (2022)
https://doi.org/10.2320/matertrans.MT-M2021234

Determination of peak ordering in the CrCoNi medium-entropy alloy via nanoindentation

Mingwei Zhang, Qin Yu, Carolina Frey, Flynn Walsh, Madelyn I. Payne, Punit Kumar, Dongye Liu, Tresa M. Pollock, Mark D. Asta, Robert O. Ritchie and Andrew M. Minor
Acta Materialia 241 118380 (2022)
https://doi.org/10.1016/j.actamat.2022.118380

Element-resolved local lattice distortion in complex concentrated alloys: An observable signature of electronic effects

Hyun Seok Oh, Khorgolkhuu Odbadrakh, Yuji Ikeda, et al.
Acta Materialia 216 117135 (2021)
https://doi.org/10.1016/j.actamat.2021.117135

Tuning the degree of chemical ordering in the solid solution of a complex concentrated alloy and its impact on mechanical properties

S. Dasari, A. Jagetia, A. Sharma, et al.
Acta Materialia 212 116938 (2021)
https://doi.org/10.1016/j.actamat.2021.116938

Deformation mechanisms of CoCrFeMnNi high-entropy alloy under low-cycle-fatigue loading

Kaiju Lu, Ankur Chauhan, Aditya Srinivasan Tirunilai, et al.
Acta Materialia 215 117089 (2021)
https://doi.org/10.1016/j.actamat.2021.117089

Atomic interaction effect on magnetic properties of α-phase Fe–V alloys by Mössbauer and X-ray photoelectron spectroscopy

H.-Y. Liu, J.-J. Wang, Y.-H. Zhang and C.-M. Liu
Physica A: Statistical Mechanics and its Applications 567 125676 (2021)
https://doi.org/10.1016/j.physa.2020.125676

Effects of annealing on hardness, yield strength and dislocation structure in single crystals of the equiatomic Cr-Mn-Fe-Co-Ni high entropy alloy

Dengshan Zhou, Zhenghao Chen, Kazuki Ehara, et al.
Scripta Materialia 191 173 (2021)
https://doi.org/10.1016/j.scriptamat.2020.09.039

Effect of Fe additions on the microstructure and properties of Nb-Mo-Ti alloys

O.N. Senkov, S.I. Rao, T.M. Butler, T.I. Daboiku and K.J. Chaput
International Journal of Refractory Metals and Hard Materials 89 105221 (2020)
https://doi.org/10.1016/j.ijrmhm.2020.105221

Direct imaging of short-range order and its impact on deformation in Ti-6Al

Ruopeng Zhang, Shiteng Zhao, Colin Ophus, Yu Deng, Shraddha J. Vachhani, Burak Ozdol, Rachel Traylor, Karen C. Bustillo, J. W. Morris, Daryl C. Chrzan, Mark Asta and Andrew M. Minor
Science Advances 5 (12) (2019)
https://doi.org/10.1126/sciadv.aax2799

Influence of stacking fault energy and dislocation character on slip transfer at coherent twin boundaries studied by micropillar compression

Jan Philipp Liebig, Sebastian Krauß, Mathias Göken and Benoit Merle
Acta Materialia 154 261 (2018)
https://doi.org/10.1016/j.actamat.2018.05.037

Orientation and temperature dependence of a planar slip and twinning in single crystals of Al0.3CoCrFeNi high-entropy alloy

I.V. Kireeva, Yu.I. Chumlyakov, Z.V. Pobedennaya, et al.
Materials Science and Engineering: A 737 47 (2018)
https://doi.org/10.1016/j.msea.2018.09.025

Impact of short-range ordering on yield strength of high manganese austenitic steels

Jee-Hyun Kang, Tobias Ingendahl, Jörg von Appen, Richard Dronskowski and Wolfgang Bleck
Materials Science and Engineering: A 614 122 (2014)
https://doi.org/10.1016/j.msea.2014.07.016

In-situ neutron diffraction study of thermal phase stability in a γ-TiAl based alloy doped with Mo and/or C

Přemysl Beran, Martin Petrenec, Milan Heczko, et al.
Intermetallics 54 28 (2014)
https://doi.org/10.1016/j.intermet.2014.05.010

Fundamental factors on formation mechanism of dislocation arrangements in cyclically deformed fcc single crystals

P. Li, S.X. Li, Z.G. Wang and Z.F. Zhang
Progress in Materials Science 56 (3) 328 (2011)
https://doi.org/10.1016/j.pmatsci.2010.12.001

On slip band growth in neutron-irradiated copper single crystals

Gerhard Kroeger, Harald Godon and Hartmut Neuhäuser
Journal of the Mechanical Behaviour of Materials 20 (1-3) 21 (2011)
https://doi.org/10.1515/JMBM.2011.003

First-principles investigation of perfect and diffuse antiphase boundaries in HCP-based Ti-Al alloys

A. Van De Walle and M. Asta
Metallurgical and Materials Transactions A 33 (13) 735 (2002)
https://doi.org/10.1007/s11661-002-1002-8

First-principles investigation of perfect and diffuse antiphase boundaries in HCP-based Ti-Al alloys

A. van de Walle and M. Asta
Metallurgical and Materials Transactions A 33 (3) 735 (2002)
https://doi.org/10.1007/s11661-002-0139-9

Role of interphases in the deformation mechanisms of an α/β titanium alloy at 20 K

A Ambard, L Guétaz, F Louchet and D Guichard
Materials Science and Engineering: A 319-321 404 (2001)
https://doi.org/10.1016/S0921-5093(00)02003-7

Multiscale Phenomena in Plasticity: From Experiments to Phenomenology, Modelling and Materials Engineering

H. Neuhäuser
Multiscale Phenomena in Plasticity: From Experiments to Phenomenology, Modelling and Materials Engineering 99 (2000)
https://doi.org/10.1007/978-94-011-4048-5_8

Temperature dependence of yield stress, deformation mode and deformation structure in single crystals of TiAl (Ti−56 at.% Al)

H. Inui, M. Matsumuro, D.-H. Wu and M. Yamaguchi
Philosophical Magazine A 75 (2) 395 (1997)
https://doi.org/10.1080/01418619708205149

Local Order and Associated Deformation Mechanisms in the γ Phase of Nickel Base Superalloys

Nicole Clement, Armand Coujou, Yvonne Calvayrac, et al.
Microscopy Microanalysis Microstructures 7 (1) 65 (1996)
https://doi.org/10.1051/mmm:1996106

Short-range order kinetics in α-AgZn for various states of post-deformation defect annealing after cold-rolling

M. Migschitz, W. Garlipp and W. Pfeiler
Acta Materialia 44 (7) 2831 (1996)
https://doi.org/10.1016/1359-6454(95)00377-0

Configurational Energy Change Caused by Slip in Short‐Range Ordered Ni–Mo

P. Schwander, B. Schönfeld and G. Kostorz
physica status solidi (b) 172 (1) 73 (1992)
https://doi.org/10.1002/pssb.2221720109

Influence de l'état d'ordre local sur les propriétés mécaniques d'alliages austénitiques Fe-Cr-Ni

B. Aïdi, M. Viltange and O. Dimitrov
Journal of Nuclear Materials 175 (1-2) 96 (1990)
https://doi.org/10.1016/0022-3115(90)90275-R

Investigation of slip line growth in F.C.C. Cu alloys with high resolution in time

A. Hampel and H. Neuhäuser
Physica Status Solidi (a) 104 (1) 171 (1987)
https://doi.org/10.1002/pssa.2211040112

Mechanisms of cyclic softening in precipitation-hardening alloys?A ball model approach and tests at 78 K

J. K. Lee, S. P. Bhat, R. Veaux and C. Laird
International Journal of Fracture 17 (2) 121 (1981)
https://doi.org/10.1007/BF00053516

Short-range order effects on the tensile behavior of a nickel-base alloy

R. L. Klueh and J. F. King
Metallurgical Transactions A 10 (10) 1543 (1979)
https://doi.org/10.1007/BF02812020

The diffusion and solubility of copper in iron

G. Salje and M. Feller-Kniepmeier
Journal of Applied Physics 48 (5) 1833 (1977)
https://doi.org/10.1063/1.323934

Thermodynamic Study of Fe–Ni Solid Solution

Katsutoshi Ono, Yukitomi Ueda, Akio Yamaguchi and Joichiro Moriyama
Transactions of the Japan Institute of Metals 18 (9) 610 (1977)
https://doi.org/10.2320/matertrans1960.18.610

An electron microscopic and diffraction study of Cu-9 wt pct Al alloy

Ari Varschavsky, Maria I. Perez and Thomas Löbel
Metallurgical Transactions A 6 (3) (1975)
https://doi.org/10.1007/BF02658417

Resistance to the motion of dislocations due to the breakdown of short-range order in substitutional solid solutions containing interstitial impurities

A. M. Olovyanishnikova, N. V. Nikitina and E. F. Dudarev
Soviet Physics Journal 18 (5) 653 (1975)
https://doi.org/10.1007/BF00893998